Are You Committing Electrical Code Violations in Your Home?

You may be one of many homeowners that are unaware they are committing code violations in their electrical system. Some violations can be dangerous, posing the risk of fire. Learning more about how to know if you are violating electrical codes in your home is important for yours and your family's safety.

Taking A Closer Look At Light Bulbs

A light bulb with higher wattage than a socket was designed to operate can cause a fire. This is called overlamping. The heat from the bulb can melt the socket, thus creating arcing that is a dangerous fire hazard. Incidents with electrical wire arcing is a common cause of house fires, so making sure you only use the proper bulbs in your lamp sockets is extremely important. Most sockets take 60watt bulbs safely, but making sure is always a good idea.

And When The Wind Blows..

When your lights start flickering every time the wind blows outside, you may have a serious problem that also violates electrical safety codes. If the wires coming into your home, usually housed in the outdoor weather head, are frayed or otherwise damaged, wind can cause them to short out, also creating the perfect conditions for arcing and fire. If your lights begin to flicker or dim, contacting a professional electrician right away is important to prevent fire.

Why You Need Ground-Fault Circuit Interrupters

In most areas today, any outlets located within four feet of a sink or other source of water are required to have built-in ground-fault circuit interrupters, GFCI. A GFCI outlet is designed to protect you from electric shock due to water contact. A GFCI outlet can shut down within seconds to prevent electrocution. If you live in an older home, learning more about having your older outlets replaced with new, up-to-code GFCI outlets is a good idea.

Aluminum Wiring Is Not Used Anymore For A Good Reason

Aluminum used to be the choice for home electrical wiring because it was more cost effective. However, aluminum has been found to easily corrode. When aluminum wiring corrodes in your home's electrical system, it can cause arcing and a serious fire hazard. Aluminum wiring may be in many older homes still today, so if your home is older, having it checked is a good idea.

If you wonder about the electrical system in your house being unsafe, discussing your concerns with an experienced home electrician is smart for learning more. By taking the time out to investigate the electrical system in your home is always a good idea. Completing a safety inspection of your electrical system on a regular schedule is best for catching problems before they get out of control.